Thick Ni-Cu Mineralisation over 400m, Open in All Directions
Released
Released
Announcement PDF
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
ASX ANNOUNCEMENT 12 September 2023
Thick Ni-Cu Mineralisation over 400m, Open in all Directions: Mangaroon (Earn-in)
HIGHLIGHTS
•
The current RC drill program has been completed at the Bookathanna North and High Range
prospects along the 45km Money Intrusion, part of the Mangaroon Ni-Cu-PGE Project (First
Quantum Minerals Earn-in). A total of 10 holes (1,074m) were drilled with down hole EM
(“DHEM”) to commence in September 2023.
The first hole of the program at Bookathanna North (REYRC013, for 153m) targeting a
37,000S conductor plate, intersected ~14m of Ni-Cu sulphide mineralisation from 37m (ASX 31
August 2023).
•
•
Visual, thick Ni-Cu mineralisation has now been confirmed over 400m strike and remains
open in all directions. REYRC019, a 200m step out hole from REYRC013 intersected 27m of
Ni-Cu sulphide mineralisation including 2m of semi-massive sulphides with no previously
defined geophysical signature. The sulphides appear to be high tenor, comprised of 40-50%
combined pentlandite and chalcopyrite in equal proportions.
• Given the tenor, style and thickness of mineralisation, the entire Money Intrusion will be
reassessed with work to include Induced Polarization (“IP”) surveys to search for deeper,
massive sulphides, trap sites.
•
Assays from the program are expected throughout September/October 2023. DHEM results
are expected in October 2023.
•
This and future programs are fully funded by First Quantum Minerals and managed by
Dreadnought.
Dreadnought Resources Limited (“Dreadnought”) is pleased to announce that RC drilling
has intersected further significant visual Ni-Cu sulphides at the Bookathanna North prospect
along the 45km long Money Intrusion part of the
Mangaroon Ni-Cu-PGE Project, located in the
Gascoyne Region of Western Australia.
Dreadnought’s Managing Director, Dean Tuck, commented:
“For the past two years, the work programs at the Money Intrusion
have focused on confirming the fertility, high tenor and potential to
form sulphide accumulations. This program has been a major leap
forward confirming massive and semi-massive sulphides within
thick halos of disseminated and net textured sulphides at a
marginal trap site within the Money Intrusion. There are two key
outcomes from this program. Firstly, that the Money Intrusion can
form high tenor massive sulphides and that the search for
additional trap sites is imperative. Secondly, given the high tenor of
mineralisation, massive sulphides are not required for high-grade
mineralisation and geophysical techniques used to date may have
missed significant targets. We look forward to re-assessing the
entire Money Intrusion, including follow up geophysics and drilling
at Bookathanna North later in 2023.”
Figure 1: Nick Chapman (L) and Chris Manners (R) with semimassive sulphide RC chips from a step out drill hole at the
Bookathanna North prospect.
dreadnoughtresources.com.au
1
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
SNAPSHOT – MANGAROON Ni-Cu-PGE
Major Miner, First Quantum Minerals, Earning-in
•
The potential of the Money Intrusion is underscored by an Earn-In with First Quantum Minerals Ltd (TSE:FM), a
~$20B TSX listed company (ASX 7 Apr 2021, ASX 30 Aug 2022).
•
First Quantum Minerals can earn an initial 51% interest by funding $12M of expenditure by 1 March 2026. First
Quantum Minerals may withdraw at any time during the earn-in phase with 0% interest.
•
Upon satisfying the earn-in requirements, a Joint Venture will be formed where First Quantum Minerals may elect
to increase its interest to 70% by sole funding expenditure up until a Decision to Mine.
•
Once a Decision to Mine has been made, Dreadnought can elect to either:
• Maintain its 30% by co-contributing.
• Dilute to 20% and be loan carried by First Quantum Minerals, repaid through revenue.
• Divest its 30% interest to First Quantum Minerals at fair market value.
•
Dreadnought retains gold rights across the earn-in tenements.
Fertile Ni-Cu-PGE System Confirmed
•
Fertile Ni-Cu-PGE sulphide systems are rare and the Money Intrusion has already been proven to contain high
tenor magmatic Ni-Cu-PGE mineralisation.
•
The Money Intrusion is confirmed to be ~800Ma, a fertile time for Ni-Cu-PGE systems globally. Highly prospective
keel geometries which are suitable for forming trap sites for magmatic sulphide accumulations have been identified.
•
First pass drilling in 2022 at the Bookathanna and High Range prospects intersected magmatic sulphide
mineralisation including (ASX 10 Nov 2022). To date, the Ni and Cu have been in ~50:50 proportions.
•
Notwithstanding the early-stage drilling, a significant success rate has already been achieved. Out of the 22 RC
holes (2,906m) drilled to date, 15 holes have either assayed or shown visual/pXRF evidence of Ni-Cu-PGE
sulphides.
No Modern Exploration
•
Outcropping Ni sulphides were identified by Alan McDonald, the Pastoralist at Mangaroon in the early 1960s.
However, no detailed geophysical, geochemical or mapping programs were ever undertaken.
•
The first-ever detailed airborne magnetics, surface geochemical, ground EM and mapping surveys have now
confirmed the potential of the 45km long Money Intrusion.
Genuine Camp Scale Potential
•
Outcropping blebby sulphides have been confirmed over significant portions of the ~45km long Money Intrusion.
•
Multiple plumbing centres have been interpreted, each with the potential for trap sites within the magma pathways.
•
Mineralisation has already been confirmed by drilling at three prospects within the Money Intrusion: Bookathanna,
Bookathanna North and High Range.
Nickel and Copper are Critical to the Low Carbon Energy Transition
•
Nickel is essential to clean energy technologies including being a major cathode material in lithium-ion batteries.
Furthermore, nickel sulphide deposits have a much lower carbon footprint when being converted to Class 1 nickel
for battery grade applications.
•
Copper is essential for electricity-related technologies with renewable energy systems requiring up to 12x more
copper compared to traditional energy systems.
dreadnoughtresources.com.au
2
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
Figure 2: Plan view image showing the location of recently completed drill holes (red dots) in relation to previous drilling
over a magnetics (RTP 1VD) and ortho image. The Money Intrusion is outlined in green.
dreadnoughtresources.com.au
3
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
Technical Discussion of Ni-Cu-PGE RC Drilling (REYRC013-22)
The drill program was originally designed as 5 RC
holes with DHEM to test 5 EM conductors within the
Money Intrusion (2 at Bookathanna North and 3 at
High Range). Following the intersection of massive
sulphides in the first hole (REYRC013), an additional
5 holes were drilled at Bookathanna North infilling
and then stepping out north and south along strike. A
total of 10 holes have been drilled (1,074m) with 7
holes at Bookathanna North and 3 at High Range.
Drilling generally collared into the shallow and weakly
weathered gabbroic core of the Money Intrusion
before passing into the footwall olivine dolerite and
finishing in gneissic to granitic country rock.
Significantly, the furthest north hole (REYRC017)
intersected a thick gabbroic core and did not reach
the mineralised footwall olivine dolerite or country
rock. REYRC017 highlights the variable geometry of
the Money Intrusion and potential to form trap sites
for sulphide accumulation.
Importantly, 6 of the 7 holes at Bookathanna North
intersected thick (10-50m) disseminated and net
textured Ni-Cu sulphides within the footwall olivine
dolerite. Of these REYRC013 and REYRC019 each
Figure 3: Photo of massive sulphide RC chips from 45-46m
intersected 2m of semi-massive to massive sulphides
comprised of 40-50% pentlandite and chalcopyrite.
within the mineralised envelope. Logging details are
shown in Table 1 below. Significantly, REYRC019 was a blind step out hole not targeting a conductive anomaly.
REYRC019 intersected semi-massive sulphides emphasising the need for the entire Money Intrusion to be reassessed
given the results to date.
All sulphide mineralisation consists of pentlandite (Fe,Ni)9S8, chalcopyrite (CuFeS2) and pyrrhotite (Fe(1-x)S) with
pentlandite and chalcopyrite making up ~40-50% of the sulphide mix with the remainder being pyrrhotite. In addition
to the observed mineralisation, the presence of Ni and Cu was confirmed by handheld XRF.
At High Range, 3 holes were drilled (REYRC020-22, 255m) targeting three conductive plates ranging from 450900S. These holes intersected sheared metasediments within the Edmund Group explaining the EM conductors.
These results will be incorporated into the overall reassessment of the entire Money Intrusion
Assay results are expected throughout September/October 2023. DHEM survey results are expected in October
2023.
Table 1: Significant Sulphide Intervals – Visual Estimates
REYRC014
REYRC015
REYRC016
From
(m)
37
45
47
35
28
41
To
(m)
45
47
51
61
57
73
Interval
(m)
8
2
4
26
29
32
REYRC018
5
58
53
REYRC019
59
78
80
78
80
86
19
2
6
Hole ID
REYRC013
dreadnoughtresources.com.au
Mineralisation
Style
Disseminated
Massive
Net Textured
Disseminated
Disseminated
Disseminated
Disseminated /
Net Textured
Disseminated
Semi-Massive
Disseminated
Sulphide Type
Pyrrhotite,
Pentlandite,
Chalcopyrite
Sulphide %
Prospect
1-5
80-100
5-10
1-10
1-5
1-5
Bookathanna North
1-20
1-5
30-40
1-10
4
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
Technical Discussion of Ni-Cu-PGE Exploration (E08/3274, E09/2384: First Quantum Minerals Earn-in)
The confirmation of a fertile magmatic Ni-Cu-PGE system within the 45km long Money Intrusion highlights the
potential for multiple deposits and/or deposit styles as outlined below.
-
Jinchuan Ni-Cu-PGE: The Money Intrusion has been dated to ~800Ma, similar in age and tectonic setting
to the Jinchuan Ni-Cu-PGE deposit in China (>500 Mt @ 1.2% Ni, 0.7% Cu, ~0.4 g/t PGE, Lightfoot 2007).
Jinchuan contains three main deposits over ~6.5kms of strike, each situated within a sub-chamber of the
overall intrusion. Only one of the deposits outcrops at surface. Mineralisation is dominated by net-textured
and disseminated sulphides with minor massive sulphide accumulations. The disseminated sulphides form an
envelope around the higher-grade, net-textured and massive sulphides.
-
Eagle and Eagle East: To date, 15 out of 22 RC holes intersected mineralisation along significant strike
showing increasing width and intensity near subtle changes in the walls and base of the intrusion, including
the formation of massive and semi-massive mineralisation. These results highlight the potential for massive
sulphide mineralisation to concentrate and form at trap sites. This is similar to Eagle and Eagle East (~5Mt
@ 3.5% Ni, 2.9% Cu, 1.6g/t PGE, 0.1% Co, Lundin 2013) located in North America.
Drill targeting to date has been dominated by FLEM surveys designed to identify near-surface, massive sulphides along
the southwestern edge of the Money Intrusion. Drilling has confirmed high tenor massive, semi-massive sulphides
within a halo of net-texture and disseminated sulphides with mineralisation intensifying in trap sites along the edges
and base of the intrusion. Drilling at Bookathanna North has confirmed that thick mineralisation occurs over a
significant strike length and that net-textured and semi-massive sulphide accumulations have not been identified by
the FLEM surveys.
Given the high tenor of the Ni-Cu
sulphide system, net-textured and
semi-massive sulphides are viable
targets in their own right.
Additionally, deeper trap sites
with the potential to form
significant
massive
sulphide
accumulations have not been
targeted or assessed.
Targeting going forward will focus
on identifying:
- net textured and heavily
disseminated
sulphide
mineralisation using IP surveys:
and
- deep trap sites for massive
sulphides
using
geophysical
inversions and more powerful EM
surveys.
A review reassessment of the
Money Intrusion and the targeting
completed to date is underway
with further drill targets expected
to be defined in the December
2023 quarter.
Figure 4: Plan view image showing
the location of recently completed
drill holes at Bookathanna North in
relation to FLEM plates over an
orthoimage and interpreted Money
Intrusion.
dreadnoughtresources.com.au
5
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
Background on Mangaroon (E08/3274, E8/3178, E09/2384, E09/2433, E09/2473: First Quantum Minerals Earn-in) (E08/3275,
E08/3439, E09/2290, E09/2359, E09/2370, E09/2405, E09/2448, E09/2449, E09/2450, E09/2467, E09/2478, E09/2531, E09/2535, E09/2616,
M09/91, M09/146, M09/147, M09/174, M09/175: 100%)
Mangaroon (Figure 5) covers >5,200sq kms of the Mangaroon Zone in the Gascoyne Region of Western Australia
and is comprised of:
-
the ~45km long Money Intrusion (First Quantum Minerals earn-in) which contains high tenor magmatic NiCu-PGE mineralisation;
-
the >10km long Mangaroon Au Shear Zone (100%) where fractured, small scale ownership has limited
previous gold exploration with only ~200m of the >10km having been drilled notwithstanding the high-grade,
camp scale potential;
-
the ~43km long Yin REE Ironstone Complex (100%) which already contains: an independent total Resource
of 20.06Mt @ 1.03% TREO (ASX 5 Jul 2023) over only ~4km of the ~43km of ironstones including an initial
Indicated Resource of 5.52Mt @ 1.23% TREO over only ~250m of strike (ASX 5 Jul 2023); and an Exploration
Target of 50-100Mt at 0.9-1.3% TREO (ASX 13 Feb 2023) over 40 kms of strike.
-
the ~9km long REE-Nb-Ti-P-Sc C1-C5 carbonatites which contain an initial independent Inferred Resource
of 10.84Mt @ 1.00% TREO at C3 (ASX 28 Aug 2023).
Figure 5: Plan view map of Mangaroon showing the location of the First Quantum Minerals Earn-in and 100% Dreadnought
ground (Mangaroon Au Shear Zone, Yin REE Ironstone Complex and REE-Nb-Ti-P-Sc C1-C5 carbonatites).
dreadnoughtresources.com.au
6
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
For further information please refer to previous ASX announcements:
•
•
•
•
•
•
•
•
•
25 November 2020
7 April 2021
14 February 2022
10 June 2022
30 August 2022
10 November 2022
24 March 2023
30 August 2023
31 August 2023
Mangaroon Ni-Cu-PGE & Au Project
Option/JV Agreement Signed with Global Base Metal Miner
Conductors Defined Along the Money Intrusion
Drilling Successfully Completed at Mangaroon Ni-Cu-PGE
Mangaroon Ni-Cu-PGE Project advances to $152M Earn-In
Exploration Update Mangaroon Ni-Cu-PGE (FQM Earn-In)
Five Strong EM Conductors at Mangaroon Ni-Cu-PGE Project
Drilling Commenced at Money Intrusion Ni-Cu-PGE
Massive and Disseminated Ni-Cu Sulphides Intersected
UPCOMING NEWSFLOW
September-December: Ongoing drilling results from completed drilling at Mangaroon REE (100%)
12 (Melbourne) & 14 (Sydney) September: New World Metals Conference
September: Results of geophysical surveys at Mangaroon (100%)
September: Commencement of RC drilling at Mangaroon Au (100%)
September: Commencement of drilling at Tarraji-Yampi (80% and 100%)
September: Results of geophysical and geochemical surveys at Central Yilgarn (100%)
September: 2023 Annual Report
October/November: Results from target generation and definition work at Bresnahan (100%)
October/November: Further RC drilling at Mangaroon Ni-Cu-PGE (Earn-in) and Au (100%)
October: Quarterly Activities and Cashflow Report
23 November: Annual General Meeting
December 2023 quarter: REE Resource upgrade (Mangaroon 100%)
~Ends~
For further information please contact:
Dean Tuck
Managing Director
Dreadnought Resources Limited
E: dtuck@dreres.com.au
Jessamyn Lyons
Company Secretary
Dreadnought Resources Limited
E: jlyons@dreres.com.au
This announcement is authorised for release to the ASX by the Board of Dreadnought.
dreadnoughtresources.com.au
7
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
Cautionary Statement
This announcement and information, opinions or conclusions expressed in the course of this announcement contains forecasts and
forward-looking information. Such forecasts, projections and information are not a guarantee of future performance, involve unknown
risks and uncertainties. Actual results and developments will almost certainly differ materially from those expressed or implied. There
are a number of risks, both specific to Dreadnought, and of a general nature which may affect the future operating and financial
performance of Dreadnought, and the value of an investment in Dreadnought including and not limited to title risk, renewal risk,
economic conditions, stock market fluctuations, commodity demand and price movements, timing of access to infrastructure, timing of
environmental approvals, regulatory risks, operational risks, reliance on key personnel, reserve estimations, native title risks, cultural
heritage risks, foreign currency fluctuations, and mining development, construction and commissioning risk.
Competent Person’s Statement – Exploration Results
The information in this announcement that relates to geology, exploration results and planning, and exploration targets was compiled
by Mr. Dean Tuck, who is a Member of the AIG, Managing Director, and shareholder of the Company. Mr. Tuck has sufficient
experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken
to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves'. Mr. Tuck consents to the inclusion in the announcement of the matters based on the information in the
form and context in which it appears.
The Company confirms that it is not aware of any new information or data that materially affects the information in the original reports,
and that the forma and context in which the Competent Person’s findings are presented have not been materially modified from the
original reports.
dreadnoughtresources.com.au
8
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
INVESTMENT HIGHLIGHTS
Kimberley Ni-Cu-Au Project (80/100%)
The project is located only 85kms from Derby in the
West Kimberley region of WA and was locked up as a
Defence Reserve since 1978.
The project has outcropping mineralisation and historic
workings which have seen no modern exploration.
Results to date indicate that there may be a related,
large scale, Proterozoic Cu-Au-Ag-Bi-Sb-Co system at
Tarraji-Yampi, similar to Cloncurry/Mt Isa and Tennant
Creek.
Mangaroon Ni-Cu-PGE JV & Au/REE 100%
Project
Mangaroon covers ~5,200 kms and is located 250kms
south-east of Exmouth in the Gascoyne Region of WA.
At the Money Ni-Cu-PGE has been identified and is
subject to an earn-in by First Quantum Minerals (up to
70%). Dreadnought also has areas of outcropping highgrade gold including the historic Star of Mangaroon and
Diamonds gold mines. In addition, Mangaroon has
emerged as a globally significant, rapidly growing,
potential source of critical minerals. Highlights include:
-
An Exploration Target of 50-100Mt at 0.9-1.3%
TREO estimated for the top 150m of the ~43km
long Yin REE Ironstone Complex (ASX 13 Feb 2023).
-
An independent Resource for Yin Ironstones Complex of 20.06Mt @ 1.03% TREO over only ~4kms – including
an Indicated Resource of 5.52Mt @ 1.23% TREO over just 250m strike (ASX 5 Jul 2023).
-
Regional source of rare earths at the C1-C5 carbonatites totaling ~9kms x ~1km (ASX 7 Aug 2023).
-
A large, independent initial Resource of 10.84Mt @ 1.00% TREO at C3, containing a range of critical minerals
including rare earths, niobium, phosphate, titanium and scandium (ASX 28 Aug 2023).
Bresnahan HREE and Au Project (100%)
Bresnahan is located ~125km southwest of Newman in the Ashburton Basin. The project comprises ~3,700 sq kms
covering over 200kms strike along the Bresnahan Basin / Wyloo Group unconformity. Bresnahan is prospective for
unconformity related heavy rare earth (“HREE”) deposits similar to Browns Range HREE deposits and mesothermal
lode gold similar to Paulsen’s Au-Ag-Sb deposits along strike.
Prior to consolidation by Dreadnought, the Bresnahan Basin had only been explored for unconformity uranium with
limited exploration for mesothermal gold. Bresnahan is a first mover opportunity to explore for unconformity HREE.
Central Yilgarn Gold, Base Metals, Critical Minerals & Iron Ore Project (100%)
Central Yilgarn is located ~190km northwest of Kalgoorlie in the Yilgarn Craton. The project comprises ~1,600 sq
kms covering ~150km of strike along the majority of the Illaara, Yerilgee and Evanston greenstone belts. Central
Yilgarn is prospective for typical Archean mesothermal lode gold deposits, VMS base metals, komatiite hosted nickel
sulphides and critical metals including Lithium-Caesium-Tantalum.
Prior to consolidation by Dreadnought, the Central Yilgarn was predominantly held by iron ore explorers and
remains highly prospective for iron ore.
dreadnoughtresources.com.au
9
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
Table 2: Drill Collar Data (GDA94 MGAz50)
Hole ID
REYRC013
REYRC014
REYRC015
REYRC016
REYRC017
REYRC018
REYRC019
REYRC020
REYRC021
REYRC022
Easting
364221
364222
364192
364245
364279
364150
364136
360783
360759
360725
Northing
7384666
7384657
7384670
7384710
7384805
7384574
7384456
7376739
7376696
7376672
RL
286
288
285
288
288
288
286
334
333
333
Dip
-70
-70
-85
-75
-70
-60
-80
-60
-60
-60
Azimuth
045
40
215
15
20
30
215
290
270
260
EOH
153
141
81
87
177
69
111
57
81
117
Type
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
Prospect
Bookathanna North
High Range
JORC Code, 2012 Edition – Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling techniques
•
RC Drilling
•
•
•
Nature and quality of sampling (e.g. cut channels, random
chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc.). These examples should
not be taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation drilling
was used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In
other cases more explanation may be required, such as
where there is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant disclosure of
detailed information.
Reverse Circulation (RC) drilling was undertaken to produce
samples for assaying.
Two sampling techniques were utilised for this program, 1m
metre splits directly from the rig sampling system each
metre and 2m composite sampling from spoil piles. Samples
submitted to the laboratory were determined by the site
geologist.
1m Splits
Every metre drilled a 2-3kg sample (split) was sub-sampled
into a calico bag via a Metzke cone splitter from each metre
of drilling.
2m Composites
All remaining spoil from the sampling system was collected
in buckets from the sampling system and neatly deposited in
rows adjacent to the rig. An aluminium scoop was used to
then sub-sample each spoil pile to create a 2-3kg 2m
composite sample in a calico.
For gold and PGEs, all samples are submitted to the
laboratory and pulverised to produce a 50g charge for Fire
Assay (ALS Code PGM-ICP24).
Base Metal and lithological samples are analysed for 48 multielements via 4 acid digestion with MS/ICP finish (ALS Code
ME-MS61)
Drilling techniques
Drill sample recovery
•
•
•
•
Logging
•
Drill type (e.g. core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc.) and details (e.g.
core diameter, triple or standard tube, depth of diamond
tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc.).
RC Drilling
Method of recording and assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse material.
RC Drilling
Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
RC Drilling
RC chips were logged under the supervision of a qualified
geologist with sufficient experience in this geological terrane
and relevant styles of mineralisation using an industry
standard logging system which could eventually be utilised
dreadnoughtresources.com.au
Ausdrill undertook the program utilising a Drill Rigs
Australia truck mounted Schramm T685WS drill rig with
additional air from an auxiliary compressor and booster. Bit
size was 5¾”.
Drilling was undertaken using a ‘best practice’ approach to
achieve maximum sample recovery and quality through the
mineralised zones.
Best practice sampling procedure included: suitable usage of
dust suppression, suitable shroud, lifting off bottom between
each metre, cleaning of sampling equipment, ensuring a dry
sample and suitable supervision by the supervising geologist
to ensure good sample quality.
10
ASX:DRE
+61 (08) 9473 8345
info@dreres.com.au
Unit 1, 4 Burgay Court
Osborne Park WA 6017
ABN 40 119 031 864
Criteria
JORC Code explanation
Commentary
•
within a Mineral Resource Estimation.
•
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc.) photography.
The total length and percentage of the relevant
intersections logged.
Lithology, mineralisation, alteration, veining, weathering and
structure were all recorded digitally.
Chips were washed each metre and stored in chip trays for
preservation and future reference.
RC pulp material is also analysed on the rig by pXRF and
magnetic susceptibility meter to assist with logging and the
identification of mineralisation.
Logging is qualitative, quantitative or semi-quantitative in
nature.
Sub-sampling
techniques and sample
preparation
•
•
•
•
•
•
If core, whether cut or sawn and whether quarter, half or
all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc.
and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected, including for
instance results for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of
the material being sampled.
Preliminary pXRF analysis
pXRF analysis of pulverised and partially homogenised reject
RC sample piles is fit for purpose as a preliminary
exploration technique.
pXRF is a spot reading on raw (unprocessed) RC sample
piles with variable grain sizes and states of homogenisation.
High grade results were repeated at multiple locations to
confirm repeatability. The competent person considers this
acceptable within the context of reporting preliminary
exploration results.
RC Drilling
From every metre drilled, a 2-3kg sample (split) was subsampled into a calico bag via a Metzke cone splitter or taken
as a grab sample from the bulk reject in more clay-rich
material.
QAQC in the form of duplicates and CRM’s (OREAS
Standards) were inserted through the ore zones at a rate of
1:50 samples. Additionally, within mineralised zones, a
duplicate sample was taken and a blank inserted directly after.
2-3kg samples will be submitted to ALS laboratories (Perth),
oven dried to 105°C and pulverised to 85% passing 75um to
produce a 50g charge for Fire Assay with ICP-AES finish to
determine Au and PGEs (PGM-ICP24) and 0.25g aliquot for
four acid digest to determine 48 elements (ME-MS61) with
overranges as required.
Standard laboratory QAQC is undertaken and monitored.
Quality of assay data
and laboratory tests
•
•
•
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc., the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory checks)
and whether acceptable levels of accuracy (i.e. lack of bias)
and precision have been established.
Preliminary pXRF analysis
Olympus Vanta M Series pXRF analyser is used to provide
preliminary quantitative measurement of mineralisation. A 3beam, 35 second reading time was used with a single reading
on unprepared raw RC chip sample pil
Share your feedback
Discover